Forum > LCD TV forum

17PW25-4

<< < (4/4)

vinceroger69:
Hi guys anyone know which pins it is jump with resistors so i can check all the voltages are ok as only have the psu here thanks.

Turnip:
Hi Vince,

Maybe not useful but wrote a note for a working one - Chris

vinceroger69:
Thanks for that it may help this is the schematic i have i just need to know which pins to link to test just the psu/backlight circuit there is one pin marked soft start does that need jumping? not sure if to a voltage or to ground, im still learning to read schematics and also new in electronics as only a hobby.

vinceroger69:
My guess too force this psu on with the mainboard disconnected, is join pins 4,6,14 then if still no back light voltage add pin 8 too pin 14
whats yours guys thoughts

Navigation

[0] Message Index

[*] Previous page