Forum > PLASMA TV forum

LG flatron plasma

(1/1)

boo:
hi all just wondering if anyone can help....

got a LG flatron 42" plasma model number R242PX11 and there is no picture, got sound though...can anyone suggest what is wrong and if its goin to cost a fortune to repair or if possible to repair myself??

thanx

ernie:
you need to replace the y sus, z sus, and ctrl board. i beleive ohms supply (whos contact details can be found on these forums)can get these for you.i did mine with these three bourds cost me £85 but now works perfect i think ohms supply are cheaper,as i got mine elsewhere before i heard of them

BC109:
Not sure if erine is thinking this is a V7 panel?
PX11 is a V6 panel. Fault is usually YSUS or ZSUS, YSUS seems to be more common. Check fuses on these board & voltage Vs & Vy as per panel. If the voltage/s are missing remove power to YSUS or ZSUS and see if it comes up.

ernie:
i was thinking of the v7 as that is what mine is and thats right you could get away with changing just the one board on the v6

BC109:
I should of also said Lower YDRV board commonly faults, you can unplug this and see if it powers up too.
If its faulty, it's recommended to replace YSUS as well

Navigation

[0] Message Index