Forum > LCD TV forum

TEACLCD4282FHD Stuck in Standby

<< < (2/2)

Turnip:
Hi Peter,

Why not get a Neon/Cello  RCU, might be the cheapest option - Chris.

peter6701:
Thanks Chris

I have another theory though.  Looking at the MSD.306, the interface connector for input is labelled (top) 'IR & Key'.  Rear side is labelled 'gnd k7 k6 k5 k4 k3 k2 k1 k0 gnd ir grn red 5vir'.

I have installed the NeonIQ board into a Teac TV.  The LED indicator is o.k.  However...the TV buttons don't match what the TV is expecting.  They appear to be mapped differently.  I need to pull it apart again to map it out.  That explains the buttons.

IR input seems to be separate.  I need to prove it's receiving IR Data.  I get no flicker of the status light...I don't know if this is normal or not.

Looks like a job for the weekend.

regards

Peter

Turnip:
Hi Peter,

Guess an Eeprom jobby, famed with Neon/Cello stuff.

You didn't mention the board you have, But I have a C2751F meself that needs a kick up the Eeprom, and would love a bin.

All the best - Chris.

Navigation

[0] Message Index

[*] Previous page