Forum > LCD TV forum

Sony KDL-32V4000 schematic

(1/2) > >>

In_Focus:
Hi all,

Can anyone assist with schematics for a KDL-32V4000? The set appears totally dead, no sign of any secondary supplies from the PSU not even a standby supply.

EDIT D6104 type R2F is S/C, any suggestions for an equivalent?

Thanks

John.

jordan:
Diode D-6104 = 10ERB20 (200V/1A)
Chassis of this apliance is SE2AG

In_Focus:
Thanks Jordan, fitted a BA157 and works a treat  :c017:

Turnip:
Hi folks,

Same set, different problem.

Set comes on with a dull picture and no sound - Background hiss comes and goes with Vol OSG so suspect it's a SSB issue.

Noticed that this model has more than one screen fitted - This one's a Sharp.

Several on Ebay where screen isn't specified, so wonder if the same SSB is used for all screen makes with maybe just Eeprom software to sort the differences ?

Any thoughts ? - Thanks - Chris.

downunder:

Hi Chris,

You could try the Service Diagnostic Menu but if it's not generating an error code, the fault is probably not logged.

It does sound like a duff main board. This set should have AV-OUT. Check the picture on a monitor. If bad, it's the SSB.

I do believe the software for various panels is stored in the eeprom, so matched part number is essential. - Bruce

Navigation

[0] Message Index

[#] Next page