Forum > LCD TV forum

Philips 42pfl7403d/10 bad settings in service menu

(1/2) > >>

torentino:
Hello,

was jerking around the service menu (https://www.youtube.com/watch?v=htH26DbpOx8) and shit happened. :41:
Enabled searching DVB-T regardless country and MPEG4 and saved settings.
Now white led is blinking at startup, then 2 red blinks. This must be bad speakers contact or something similar.
But I think that are bad settings in eeprom.
Any idea anyone?


UPDATE

Nothing about spekers, the error is 2 38 I2C bus. Was able to communicate with TV, data in atachment. There is also a chassis schematics, cable schematics .
Open .ht file with hyperterminal.

So,  any idea?
Anybody has a eeprom dump, just to learn one more thing? :33:

astracat:
hi
try holding menu on tv for more than thirty seconds,failing that update software
regards
astracat

torentino:
No, nothing happens.
Still rebooting. :c023:

astracat:
try update software or enter service with connection on main board
astracat

torentino:
Thank you for your help but how to update sw and where to find it?
For enter service you mean bricking for csm on mainboard?

Navigation

[0] Message Index

[#] Next page