Forum > DVD/VIDEO/Home Cinemas/Hi-Fi/Mp3/Camcorder

Toshiba RD-XV47

(1/2) > >>

samisat:
Hi all
when plug in this machine, 000 on display will appear but after 2 seconds goes off and not fuctional at all .I checked power supply and there are  5v 8.6v and 2.6v.there isn't 3.3v???replaced MOSFET and out put caps but nojoy. I will appreciate any help.
Regards sami

jordan:
12V supplay very low-check regulator KIA431A

downunder:

 Hi Sam, does another letter appear in the left of the display, eg R, T, C, D or P. These are fault codes.
R = Reel/capstan mech not working correctly.
T = Tape loading not working correctly.
C = Cassette loading not working correctly.
D = Drum not working correctly.
P = Power On +5V safety detect.

see how ya go.

Service manual has been uploaded just for you.

samisat:
Dear mate this is very kind of u.on display only comes up 000 nothing else but I just download the service manual and I will try my best.
Regards sami

downunder:
Hi Sam,

Service manual is sometimes half the battle, then you gotta win the war. Good luck.

Navigation

[0] Message Index

[#] Next page