Forum > LCD TV forum

my jvc lcd tv does not recognize hdmi inputs

(1/2) > >>

Ere:
lcd tv mode: lt-32dr7bu

have tried first powering the tv then put the the sat-receiver hdmi cable many times, nothing displayed, no message appear on the screen, other inputs like scart ..works good.. :sign0085:

downunder:

Hi ere,

HDMI micro may have been zapped by static from connecting or disconnecting HDMI plug while the equipment was on. I for one will raise my hand as guilty of this. A Factory Reset may help your case.

Simultaneously press and hold INFO and MUTE to enter the Service Mode. When the menu is displayed,
press 9 to start the factory reset. Don't know if it will restore HDMI, but at least you've tried.

Bruce

Kilroys:
Symptom:
 HDMI input does not work.

Cause:
 The HDMI input was deactivated by opening the rear cover.

Countermeasure:
 Please perform SYSTEM SETTING described in the service manual.

brainstorm:

--- Quote from: Kilroys on August 30, 2014,04:07:04 ---Symptom:
 HDMI input does not work.

Cause:
 The HDMI input was deactivated by opening the rear cover.

Countermeasure:
 Please perform SYSTEM SETTING described in the service manual.

--- End quote ---

Hi you will need a JVC service remote
Brian

Turnip:
Hi Brian,
Nice to see you back - been a while, guess Quuq has something - Chris.

Navigation

[0] Message Index

[#] Next page