Forum > PLASMA TV forum

philips 42fd9944 01s red blinks

(1/1)

Ere:
Hello

please help troubleshoot this set wich turns to red blinking after 10 seconds of green led,

Philips 42fd9944 01s

power supply fm24aa



this is the illustrated results measured in this psu..

http://www.4shared.com/download/BbeL4eOaba/42fd9944_01s_psu.jpg

downunder:

Hi ere,

Major recap, from my own personal experience.

C2113, C2230, C2231, C2508, C2510, C2540, C2541, C2662, C2663, C2664 - these are normal elcos.

Also C2205 and C2510 - these are surface mounts.

Bruce

Ere:
downunder thank you v.much

have replaced all mentioned caps, and even others, but there's something tricky..i don't think main logic board defect.. since remote responds to on/off, however will try replacing ics even if tested ok..

downunder:

Well, that's a bummer.ou say the red LED blinks in faulty state. Is it an error code? Usually double digits differentiated by slow blinks + fast blinks eg. 2 slow followed by 4 fast = code 24.          Bruce

Navigation

[0] Message Index