Forum > LCD TV forum

finlux 32h6072-d

<< < (2/2)

Turnip:
Hi Astrocat,

Thanks - will go check voltages more carefully than I usually do - Chris.

astracat:
circuit ref r173 should be 1ohm it read 10ohm, still testing it but may have software problem as well, so looking for software to try ps this been used mainly with a ps3 suspect software problem from ps3 update

 
regards
astracat

astracat:
hi all quick update
tv switched backlights off again voltage tested with power to backlight but negative dissapeared as its swtched via main board software now comes to mind does anyone have an update for this model tried on net but no luck yet.if i find it i will post it on here
regards
astracat. ps its like finding rocking horse muck

astracat:
hi all
latest update to fault
reset via s/menu then run ,reset again then setup in swiss country and run it,reset again then setup in english
seems to have cured it been running 24 hrs without problem now.still no sign of software anywhere can only think different country has forced software to come back out of original process-er
regards
astracat

astracat:
hi all
this set been ok now for a long while.
rest via swisserland first was recommend by an engineer for an early sharp model
also for reference resister to opto was r100
regards
astracat

Navigation

[0] Message Index

[*] Previous page