Author Topic: Vestel boards (freeview +) (Read 21250 times)

videoman · « **on:** April 22, 2015,12:02:25 »

Hi does any body know who sells Vestel Boards as used in the Luxor freeview + recievers??

Mulja tv repair portal · « **on:** April 22, 2015,12:02:25 »

tv tony · « **Reply #1 on:** April 23, 2015,03:47:57 »

A model number would be appreciated, it is possibly the 835 chassis but my ESP powers are somewhat below par today, send us that and I am sure someone will oblige. Thank you.

videoman · « **Reply #2 on:** April 23, 2015,09:58:20 »

Yes you must be good without the model number etc, they are a Luxor LUX-PVR320-690 Followed by DVB TV Recorder Board number 16MB835N-$ T835,if you look on the CHS web page the PCB looks like part number 4820115 Sorry?

Mulja tv repair portal · « **Reply #2 on:** April 23, 2015,09:58:20 »

tv tony · « **Reply #3 on:** April 23, 2015,12:06:35 »

Hello,
The 835, yes a good machine, got them under Hitachi and Ferguson but will look under Luxor, off work till Fri, (what a day to go back!). Will contact you then, stay lucky,
Tony Walker

videoman · « **Reply #4 on:** April 26, 2015,05:15:42 »

Hi Tony, any luck with the pcb?

tv tony · « **Reply #5 on:** April 26, 2015,22:29:36 »

Sorry, thought we still stocked the 835 main boards but they all went. What is wrong with yours, the main problem we had was the sm fet that feeds 12v to the hard drive.

Mulja tv repair portal · « **Reply #5 on:** April 26, 2015,22:29:36 »

videoman · « **Reply #6 on:** April 27, 2015,07:02:21 »

Hi Tony, the unit switched itself off and is stuck in a no signal displayed;There is 12v onto the harddrive and it spins OK What number is the SMFET?

Mulja tv repair portal · « **Reply #6 on:** April 27, 2015,07:02:21 »

Mulja tv repair portal

News: