Forum > PLASMA TV forum
Samsung PS42Q97HD power problem
Turnip:
Hi folks, and thanks again Bruce.
Checked around ICS801(MC33067) and voltages seemed reasonable but there was no drive to the lower output (QS802) FET gate, so thought it might be a duff ICS801 - and it was, surprisingly.
Still hate plasma but two Sammies done in a week gives a bit of a lift - Chris.
PS - Think a piccy of the area from service data supplied.
downunder:
Nice piccy as ever, Chris, and impressed by your fault-finding techniques. The MC33067 eh! I've never changed one of those, but you know what they say........
We'll have you sorting these plasmas out in no time. Bruce
Turnip:
Hi Bruce,
Experience has always told me that the chip is never the problem, so I circled around a bit checking those Opto-Isolators, using suitable earths for each, either side of the Hot/Cold biz - got a minor belt just once where I forgot whether I was hot or cold.
Concluded that it must be the chip, but still didn't believe it. But having an old Sammy panel with a couple of such chips on sub-panels thought to have a go.
Still hate plasma, although admit pictures can be good - Chris.
Navigation
[0] Message Index
[*] Previous page
Go to full version