Forum > DVD/VIDEO/Home Cinemas/Hi-Fi/Mp3/Camcorder

Panasonic DMR-EZ49VEB

(1/2) > >>

kennyc:
Hi guys ,This is a nearly new combi ,it has no hard drive so its just a simple combi . Problem is that it just flashes "please wait " and does nothing else . Have held the channels + and - buttons down but still doesnt fix . Dont know if its a fault or just a reset it needs . Only happened after the clocks went back . Any clues ? Thanks

jordan:
"Please wait" or "EXT-L" displayed
1.Press EXT-L button on RC
2.Unplug then plug-in appliance

downunder:

Hi Ken,

Typically caused by bulged capacitors in the power supply and directly under the DVD loader which you'll have to remove along with the digital pcb under the loader. CH+/- is not the reset method and I've never known an occasion where a reset cures this fault.

Bruce

kennyc:
Hi gents ,will try your solution later jordan and let you know . Only tried the reset with the CH+and- together because it says thats a reset in the manual Downunder . As you say it doesnt work anyway . Will strip down if Jordans idea doent work ,.Thanks for the help gents

kennyc:
Hi gents ,tried your solution Jordan but the only button on the remote says EXT- LINK and I tried it a few times with no luck. All the caps were OK as well Downunder so afraid its a goner . Thanks anyway

Navigation

[0] Message Index

[#] Next page