Sony HCD-NEZ7 - CD Skipping.

[Turnip]

Hi folks,
Had one in a couple of times where cust complained of disc skipping, so I cleaned the lens and sent it back.

Came in again so thought take it apart, discovering the spin motor, although seeming OK, was dubious using the AVO 8 on low ohms to check - They normally read about 80 Ohms + and spin - This one needed a kick start and read 10 Ohms, but still ran.

Be lost without the AVO, as Digital meters don't have enough push for a motor, but useful in their way.

Sorry Bruce - No piccies, even of the AVO - Chris.