Forum > LCD TV forum

Sharp Aquos stanby light

<< < (2/2)

BC109:
I dont have that manual but you need to enter service mode and reset error data is one method. See if this works
Off at mains.Press & hold [input] & [vol-] on panel & power on at mains.TV comes on in [K] mode.Simultaneously press [vol-] & [Pr-] on panel & the Adjustment Process Mode will appear.On bottom line check if ERROR NO: RESET reads 1 or more.If so, the Lamp Detection was executed.Select bottom line & use [vol+] or [vol-] to reset to zero.

But if you get the service manual it should help. Some need options to be reset like model number (4:3) 16:9 models etc, due to data corruption.
Hope that helps
 

tv tony:
hi, u require full service manual plus faultfinding flow chart, (for what the flow charts are worth)?
let me know as asap. ill mail them to you, regards, tony walker

lubos55:

--- Quote from: tv tony on June 03, 2008,11:35:31 ---hi, u require full service manual plus faultfinding flow chart, (for what the flow charts are worth)?
let me know as asap. ill mail them to you, regards, tony walker

--- End quote ---
Hi,
if you need this manual please send require on my email, see my profile.

badrick:
you could try checking lamp wires as they can sort on the metal work in side the screen see link attached.
andy

Navigation

[0] Message Index

[*] Previous page