Forum > LCD TV forum

BUSH DLED32165HD

<< < (2/2)

papisco:
Thanks mate' did you end up changing the power board then.

kennyc:
Am waiting for another TV with the same power supply in it then can swop over and see what happens Papisco

old tvman:
Almost certain to be one of the leds going open circuit on the led strips,as mentioned earlier check by supplying 20v to each strip or 4v to each individual led.

papisco:
Hi Kennyc old Tvman is right, I changed the power supply and mother board in mine, only to find that a led in the backlight is open, and if you put a good power supply board and switch it on, the voltage to the backlights drops to zero, in fact am now looking for the culprit that has cut of the voltage on the psu.

kennyc:
Hi Papisco ,if you manage to fix the fault let us know how you did it . Have got this TV + 2 Toshibas with the same fault but havent tried to repair the tubes . Dont know if you can get replacements or even if you can take them out to replace . Somebody else said they were glued in and were not removeable. Good luck anyway

Navigation

[0] Message Index

[*] Previous page