Forum > PLASMA TV forum

lg50pg6010

(1/2) > >>

call me al:
Hi All I have this LG 50PG6010 Fault is no picture All voltages look ok VA AND VS are there 5Vline looks ok,all fuses are ok as far as ican see Have checked for shorts on boath main boards and can find none. Any help much appricated .Thanks

jordan:
Resolder all transformer on the Y-Sus board

call me al:
Thanks Jordan have re soldered the y sus board but still the same fault ,all the heat sinks are cold .would a replacment board cure it

downunder:

Hi Al,

Is the LED on the Control board blinking? Can you locate Auto Generator shorting pads/holes on the Control board. If so, disconnect Main board from power supply, short out the pads and turn the TV on. If PSU and scan circuits are operational, you'll get test patterns on the screen. If you do, blame the Main board. If you don't, you're none the wiser.

Bruce

call me al:
Thanks Bruce led is not blinking ,still stuck think Ill look for another job ,not having much sucess these days. :41:

Navigation

[0] Message Index

[#] Next page