Mulja tv repair portal
Equipment Repairs => DVD/VIDEO/Home Cinemas/Hi-Fi/Mp3/Camcorder => Topic started by: yellowpinky on July 09, 2011,13:49:45
-
Hello Group,
After replacing a faulty laser unit,the equipment now plays dvd's ok.
The problem now is it goes into standby after aprox 10mins.
Has anyone any sugestions.
Many thanks Ian Harrison.
-
Hi Ian,
What, exactly is it -
Things with DVDs give me probs as some have/ have not - hard drives/cinema/analogue/DVB and such
Can't be arsed to check the whole lot - life is prob too short, esp at 70 - Chris.
-
Hi Chris,
It is a home cinema DVD system. No hard drive.
I did check C32 1000uf 16v which gives trouble and it measured ok.
I have since replaced it and so far it has not cut out after a days use.
I will give it a longer test and report back.
Best regards Ian.