Mulja tv repair portal
Equipment Repairs => PLASMA TV forum => Topic started by: coss on September 23, 2010,04:43:07
-
Hello!
I got a Samsung plasma with a very dim picture, whith no contrast, and very poor overall as you can see in the pictures.
All the fuses are intact and voltages OK
with the lights on:
(http://i51.tinypic.com/2yx13li.jpg)
with the lights off:
(http://i54.tinypic.com/wccutv.jpg)
lights off and no signal:
(http://i54.tinypic.com/2a0jpjo.jpg)
detail:
(http://i54.tinypic.com/71jme8.jpg)
Can anyone give me a hint on this one?
Thanks a lot!
http://i51.tinypic.com/2yx13li.jpg
http://i54.tinypic.com/wccutv.jpg
http://i54.tinypic.com/2a0jpjo.jpg
http://i54.tinypic.com/71jme8.jpg
-
Hi, same think with my plama samsung (ps50c96hd). any answer ?
-
The x-main board would be my first port of call, Board on far right looking from the r-send. It can produce dark blotchy images. This goes for both your Samsungs.
You could try activating on-board test patterns via pins on the logic board and compare results. Bruce