Mulja tv repair portal
Equipment Repairs => DVD/VIDEO/Home Cinemas/Hi-Fi/Mp3/Camcorder => Topic started by: maff99 on July 24, 2009,10:40:58
-
Hi guy's,has anybody got the circuit diagram for the power supply,I've got one that's dead,no lights at all amazing lack of d.c. voltages any where but the fan runs!NoT being a pan official repairer no help from them! It's not the mr2040 reg cos I've changed that already.
-
I can not solve this problem. sorry
-
Hi,
Ive not had this problem on this model, but I have had problems with electrolytic capacitors on the secondary of the power supply on other models- have a look for "bulging" tops on the capacitors
Hope this helps
Brian
-
Hi mate,thanks for your reply.I've checked all the caps with cap meter all well within tolerance.Just wish I had circuit for p.s.u. then I could crack it!I'am sure it's in the primary somewhere,will get back to it in the next few day's got alot on at the moment not enough hours in the day .
-
Hi,
Have a shematic, will try attach - Chris.
-
Hi Chris,thanks very much for the p.s.u. schematic,I see if I can mend it now!