Mulja tv repair portal

Equipment Repairs => CRT TV forum => Topic started by: sheldonstv on April 24, 2009,17:11:28

Title: JVC AV28WFT1EKS
Post by: sheldonstv on April 24, 2009,17:11:28

 :biggrin2:
Does anyone have a service manual for this model tv?the set powers up with sound and picture for about 5 secs before going to standby-when a picture is displayed the menu is also on screen-iv removed the 5v relay that switches the mains to the smps and hard wired the cotacts and the smps runs ok ,weve got frame and line,when the micro shuts down you have jvc displayed on the screen-i powered up the set with the nvm removed and it still goes to standby,the set then needs to be switched off then on again before you can get it to switch out of standby for it to switch off again.....
regards mike

Title: Re: JVC AV28WFT1EKS
Post by: KGM on April 25, 2009,16:32:01

Hi,

Chassis JK .

Title: Re: JVC AV28WFT1EKS
Post by: tv john on April 26, 2009,12:28:35

Replace c521 beside line o/p tr. 1st, then start worrying if it doesn't work.

john.