Mulja tv repair portal
Equipment Repairs => PLASMA TV forum => Topic started by: chrissie jones on September 05, 2013,06:07:08
-
When I plug this set.it click for a few second with light flashing..click stops and standby light starts flashing twice continuously....any repair tips..thanx chris
-
I'd start with the Z-sus Ive had 3 like this normally the Fets underneath nearest the screen connector are short, If they are its more than likely the screen.
-
i had one the same just changed the zsus board recheck va/vs voltages working ok now got the board from emos cheers
shaun
-
hay
checking x main bord pcb no lj41-09478a
on the back of bord smd transistor short circut transister no RJP30H1
Replace transister
x bord rechking ok