Mulja tv repair portal
Equipment Repairs => PLASMA TV forum => Topic started by: Ere on November 18, 2014,21:59:21
-
Hello
please help troubleshoot this set wich turns to red blinking after 10 seconds of green led,
Philips 42fd9944 01s
power supply fm24aa
(http://www.4shared.com/download/kvTstFtNba/fm24aa.jpg)
this is the illustrated results measured in this psu..
(http://www.4shared.com/download/BbeL4eOaba/42fd9944_01s_psu.jpg)
http://www.4shared.com/download/BbeL4eOaba/42fd9944_01s_psu.jpg (http://www.4shared.com/download/BbeL4eOaba/42fd9944_01s_psu.jpg)
-
Hi ere,
Major recap, from my own personal experience.
C2113, C2230, C2231, C2508, C2510, C2540, C2541, C2662, C2663, C2664 - these are normal elcos.
Also C2205 and C2510 - these are surface mounts.
Bruce
-
downunder thank you v.much
have replaced all mentioned caps, and even others, but there's something tricky..i don't think main logic board defect.. since remote responds to on/off, however will try replacing ics even if tested ok..
-
Well, that's a bummer.ou say the red LED blinks in faulty state. Is it an error code? Usually double digits differentiated by slow blinks + fast blinks eg. 2 slow followed by 4 fast = code 24. Bruce