Mulja tv repair portal

Equipment Repairs => CRT TV forum => Topic started by: geoff4e on March 05, 2010,07:57:19

Title: toshiba 32ZP48
Post by: geoff4e on March 05, 2010,07:57:19

Hi Guys new to site hope you can help
Toshiba TV 32ZP48P Problems are grainy and horizontal lines at start, picture then clears for short while before loss of picture just multi -coloured stripes like bar code effect, sound remains ok then after about 3mins TV shuts down and goes to stand by. Any ideas please?

Title: Re: toshiba 32ZP48
Post by: tv john on March 05, 2010,08:35:13

You will require a new DFS module which has 30/40 pins to be desoldered before removing.
If your not a tv engineer,then get one to do the job.
John.

Title: Re: toshiba 32ZP48
Post by: mulja on March 05, 2010,10:36:41

Agree with John
MDFS03 module faulty must be changed

http://www.chsinteractive.co.uk/electrical-components/misc/mdfs03-toshiba-module-scan-converter-dimensions-l-114mm-h-88mm-w-16mm-silver.htm

Title: Re: toshiba 32ZP48
Post by: geoff4e on March 05, 2010,11:07:47

Wow thanks for the quick response Guys.
 The price of the replacement part is a bit steep and with labour on top I wonder if it is worth doing.

Title: Re: toshiba 32ZP48
Post by: daz on March 05, 2010,11:14:48

give the Toshiba customer services a ring, its a common fault so Toshiba will supply the part for free, which is almost unheard of in this biz, they usually sent it to the engineer doing the repair so all you pay is a callout and fitting charge.
Hope this helps
Daz

Title: Re: toshiba 32ZP48
Post by: geoff4e on March 05, 2010,11:39:02

Thanks for that Daz will ring them tomorrow
On a lighter side my wife had just walked in when I was looking at the link with the price and nearly passed out then, I scrolled down to your reply and the look on her face was a picture, never seen her so happy.
:clap:
Thanks again to everyone

Title: Re: toshiba 32ZP48
Post by: geoff4e on March 07, 2010,06:57:55

Hi Guys
 Tried ringing Toshiba customer services on 01276 694000 but the line is always busy. Are there any other numbers, fax or e-mail I could try?
Thanks Geoff.

Title: Re: toshiba 32ZP48
Post by: sparky on March 07, 2010,08:34:31

hi
try

Our UK Helpdesk telephone number is: 0844 856 0730

Title: Re: toshiba 32ZP48
Post by: daz on March 09, 2010,04:35:12

sparky is spot on , you need option 3, have your model number to hand when you ring.
daz

Title: Re: toshiba 32ZP48
Post by: geoff4e on March 09, 2010,07:28:26

Result, got through on that number and they couldn’t be more helpful took all the details and the part is on its way, may take a week to ten days, then engineer to fit as and when.
Using 14” portable at the moment, so won’t have the big screen for the Grand Prix at the weekend ---- Boo--Hoo
Thanks for all for your help   Geoff.   

Title: Re: toshiba 32ZP48
Post by: daz on March 09, 2010,10:43:18

you might be lucky,
 last one i got came from germany and only took 2 days!