Mulja tv repair portal
Equipment Repairs => CRT TV forum => Topic started by: Turnip on July 07, 2010,09:32:44
-
Hi Folks,
Have one of these where on switching on, the S/by light turns red to amber then eventually flashes red in a three/three sequence.
Any ideas ? Thanks, Chris.
-
hi chris
only fault i have listed is cp150, 2200uf causes the 6v live to go dicky
good luck
daz
just checked highland electrix they have error 33 as lopt
-
Thanks Daz,
Checked Highland myself - didn't realise 3 + 3 was error 33. Should have guessed but never have thought Thomson that logical.
Will check the cap, and chuck if it's LOPT - Chris.