Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: ANDRASONI on January 18, 2019,05:39:33

Title: SAMSUNG UE40D5003 power supply+driver LED : BN44-00473A
Post by: ANDRASONI on January 18, 2019,05:39:33

I have this tv with this problem: at start-up, the St.By LED flashes twice, after which it stays in St.By, sometimes the LED flashes twice in a cycle of 5 time. At the start, for moment,is present the tensions PFC = 390V, voltages of 5,2V, 12,7V and voltage for led driver, after that this tensions fall in 0. I replaced ICP801S = SPC7011F, ICM801 = FSFR1700XSL, the electrolytes caps beside these two integrated and PC801S, PC802S, PC803S optocouplers, I redo the soldering, including the smd components, "cold" measurements on components. Only the voltage St.By = 5,2V, the rest, no change. With the coupler removed from the mainboard, the backlight does not work at all. Maybe someone has encountered this problem, thank you!

Title: Re: SAMSUNG UE40D5003 power supply+driver LED : BN44-00473A
Post by: jordan on January 18, 2019,11:18:41

Resolder this point

Title: Re: SAMSUNG UE40D5003 power supply+driver LED : BN44-00473A
Post by: ANDRASONI on January 18, 2019,13:21:51

Thank you very much mr.Jordan! :051bye:

Title: Re: SAMSUNG UE40D5003 power supply+driver LED : BN44-00473A
Post by: ANDRASONI on January 19, 2019,13:12:09

It”s OK. Thanks very much mr.Jordan.