Mulja tv repair portal

Equipment Repairs => CRT TV forum => Topic started by: chrissie jones on January 03, 2012,05:33:20

Title: SHARP LC-32P50E standby problems
Post by: chrissie jones on January 03, 2012,05:33:20

at switch on standby light gose green then back to red with both sleep and standby light flashing..help

Title: Re: SHARP LC-32P50E standby problems
Post by: Turnip on January 04, 2012,13:15:28

Hi C/J,

Isn't this an LCD tv problem  ? - Chris

Title: Re: SHARP LC-32P50E standby problems
Post by: chrissie jones on January 04, 2012,15:15:00

well yes!!!!

Title: Re: SHARP LC-32P50E standby problems
Post by: In_Focus on January 04, 2012,15:45:53

Have you tried the usual Sharp trick of powering on keeping the Vol- and AV button held down? then pess P- & V- together to access K mode.
If the micro detects more than 6 backlight shutdowns it will not let the set start until the error buffer has been cleared.

The many opto couplers on the inverter are well known to give trouble on this chassis

Title: Re: SHARP LC-32P50E standby problems
Post by: sparky on January 04, 2012,17:11:31

i tried to tell him look back at previous listing its all there
many have posted cure look
dave

Title: Re: SHARP LC-32P50E standby problems
Post by: chrissie jones on January 05, 2012,03:20:29

many thanx focus.the best info saw far.ill give it a try... :c017:

Title: Re: SHARP LC-32P50E standby problems
Post by: Turnip on January 06, 2012,12:55:18

Hi Sparky,

You too could be a moderator if you confuse everything but only in LOUD caps or lower case.

Voting - but nothing available, bit like Arab Spring with just one party - As a Humanist, bit doubtful of any gods, Tory or otherwise - Chris