Mulja tv repair portal

Equipment Repairs => CRT TV forum => Topic started by: WILLYAM1 on April 12, 2010,08:22:29

Title: tv metz
Post by: WILLYAM1 on April 12, 2010,08:22:29

hi everyone.
 i need service code for  tv metz model 25d36.
its in lock .
there is a picture of the tv and the remote.
thanks willyam1

Title: Re: tv metz
Post by: ahmad63 on April 16, 2010,11:59:03

write the  u computer number?

Title: Re: tv metz
Post by: Κώστας on April 17, 2010,01:51:53

test with  9706

Title: Re: tv metz
Post by: chrissie jones on April 17, 2010,02:33:27

metz are allso minoka.

Title: Re: tv metz
Post by: alish on April 24, 2010,09:58:04

1- press and hold "F" + "MENU"
2- press and hold "F" + "MUTE"
(on remote control)
good luck

Title: Re: tv metz
Post by: DJING_2004 on April 24, 2010,15:54:32

Got a Hitachi Rear Projection Tv Model #65F59A
I REPLACE THE DP6X DEFLECTION P.W.B.
BOARD WITH A USED ONE... BUT WORKING BOARD BECAUSE IT HAD A OPEN PICO FUSE 3AMP FUSE ON IT OPEN REPLACE THE PICO FUSE WITH OTHER ONE AND NOW A LIT GREEN LCD LIGHT IN THE MIDDEL OF THE BOARD LIGHTS ON AND OFF AND THE RELAY STARTS CHICKING ON AND OFF A LOTS OF TIMES ..AND NOW THIS SECOND DEFLECTION BOARD WENT DEAD TOO AFTER 1WEEK OF WORKING GOOD ,.....CHECK THE PICO FUSE ON IT AND ITS BAD TOO LIKE THE FIRST ONE AND ITS DOING THE SAMETHING AS THE FIRST BOARD WHAT IS MAKEING THE FUSE TO GO BAD ...HELP

GREEN LCD LIGHT IS..... D905

PICO FUSE 3AMP  .....E947