Mulja tv repair portal
Equipment Repairs => CRT TV forum => Topic started by: WILLYAM1 on June 10, 2010,14:51:13
-
hello everyone.
tv works fine for allmost 1hour then shut down and led blinks 3 times.
a ovp problem?????.
dose anyone have the blinking code???.
anyone has the same problem??.
thanks. willyam1
-
Hi
Ive not had this fault before but the common faults listed are:
Reflow IC002 and IC005(on M board)
Replace C6005
or M board faulty
hope this helps
Brian
-
hi brain.
sorry what dose it mean to reflow?and were it listed?.
willyam1
-
hi brain.
sorry what dose it mean to reflow?and were it listed?.
willyam1
Hi willyam ,brain mean reflow IC's on this board.
-
Hi Brian,
Guess you have a Sony Model/chassis guide rather better than mine - check for ages and often cannot be at all useful although known problems are probably listed somewhere.
Confused of Norwich - Glad to note you're correctly mentioned as 'Brain' - Chris.