Mulja tv repair portal
Equipment Repairs => CRT TV forum => Topic started by: ukorca on February 25, 2009,03:10:08
-
Hi there,
I have an ATEC AV370W TV that has been problematic for a while. It's about 30 months old.
Having looked around other forums, it seems to be a common fault whereby the TV appears to quickly go into standby then restart. The workaround that kept my TV working for a while is to leave the power button on and only use the standby mode for powering off the TV.
This has been OK for about 6 months, but at some point recently, the power was taken off and now the TV has started "rebooting" again.
I now have an additional problem whereby no matter what I do, when power is on to the TV, we just have an orange power lcd, rather than a red for standby or a green for on. I've taken the power off and left it for a while, but I can get the TV to start at all.
I know that a member on here, TV Tony, fixed a similar panel (an Evesham badged ATEC) and wondered if this might appear to be a related problem and if anyone knows of a sensible repair / workaround for this.
Cheers,
Orca
-
Sent him a pn.
I had a problem with my PSU on the same LCD-TV.
He tooked a look at a picture i took, and found the defective part in no time!
Tony is the BEST.