Mulja tv repair portal
Equipment Repairs => CRT TV forum => Topic started by: OldTellyMan on February 15, 2013,12:01:04
-
:sign0144: Can anyone tell me if this tv has a service menu. am now retired from the service biz, but am a bit p...... off with this my current telly.
i need fi poss, to adj the pic height as none of the screen modes allow me to see full pic.
-
Chassis JW/JVC
Enter service mode:
Press and hold INFORMATIOM button and MUTING button on RC at same time.
Press INFORMATION button to exit service mode
-
JVC LCD/PLASMA Service Menu Access
Code 1. Press the {MENU} button and go to the
User Menu screen, make sure that the indicator (arrow) is pointed and
highlights the "Picture Control". 2. The buttons on top of the remote are set to TV & VCR respectively. 3. Set sleep timer to "0" minutes and
while it is displayed, simultaneously
press the {VIDEO STATUS} & {DISPLAY}
buttons. 4. The Service Menu will be displayed. 1. Use the number keys {1-9} to select a
category. 2. Use the {CH+} {CH-} buttons to select
options. 3. Use the {VOL+} {VOL-} buttons to
change settings. 4. Use the {MUTING} button to save
settings. 5. Press the {BACK} button to exit the
Service Menu. JVC Projector Service Menu Access
Code 1. Using the remote control: 2. Press the {UP} {DOWN} {RIGHT} {LEFT}
buttons. 3. Then press the {ENTER} button. 4. The Service Menu will be displayed. 5. To exit, turn the power off. JVC LCD/PLASMA Service Menu Access
Code Method 2 1. Simultaneously press "Display" &
"Video Status" buttons on the remote
cotnrol. 2. Use 'Menu Up' & 'Menu Dn' button to
select an item to adjust. 3. To change the data value to selected
item, use ( > ) or ( < ) button on the
remote control. 4. Press "EXIT' button to 'Exit' from
service mode. Categories:
-
Press [MENU] so that it is displayed on screen.
Then simultaneously press and hold [INFO] and [MUTE] to display service menu (Info = i).
Use ^/v buttons to select ADJUST and press [VOL+] to enter.
Data changes are auto-stored. Press [MENU] to exit.