Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: Gonzini on January 11, 2018,14:34:04
-
Hi guys
Just joined the forum :)
I'm still using an ageing Panasonic TX-26lxd70 which from time to time doesn't always power up from cold.
It looks like when it gets to the point were the backlight would strike it drops out and i just get a flashing red power LED.
After a 2 or 3 power cycles with the main top power button it can start up OK.
Its has but not very often seemed to reset after being on for a while, usually loose the remote control after that happens.
I've just tried the factory reset with the V/- + i on the remote but think its more hardware like a cap failing in the PSU maybe.
Also i wondered if it is actually the backlight tubes, i read today that it has been mentioned on a certain vintage with these Panasonic's.
Anyone come across this problem with this model?
Not removed the back yet and checked the ESR on any caps, i guess if it gets worse I'll end up getting more involved.
Cheers
-
Welcome to the forum, Gonzini. Perhaps this is your problem. Bruce
-
Hi, Thanks!
Interesting PDF that, I've just checked my S/W and its at 5580-10000
Not sure how their version numbering works but the update mentioned is 3090 which appears to be a back step but maybe not...!
Tried a quick search for sddl_7lxdv3090.zip but nothing came up.
Is there a source out there for Panasonic F/W for these older TV's?
Cheers
-
Nah! Checked the oceana website but nought there. Of course, I d expect mfrs would delete older firmwares as time progresses in order to force you to buy another tv. Good luck with it. Bruce
-
Just checked my old notes but nothing leaps out at me. Factory reset:
Press and hold VOL +/- for 3+ seconds> Go to SYSTEM in Factory Mode Menu. Enter 999 to reset
Will upload service manual to downloads section. Bruce
Later:- sorry, internet's slow - timing out. Will try again later.
-
Hi Bruce
Thanks for having a look, whats this oceana website you speak of?
I did find the service docs on the web some time back.
The reset you suggest, do you think that's the same thing as i had already done? Looked like a full factory reset as it asked me for all the first time details (which i skipped..!)
Cheers
-
Oceana refers to the Pacific area. This includes Australia, NZ, SE Asia. Don't know about your reset - did you go through it to 999?
Still haven't been able to upload the service manual - something wrong at quuq end, I suspect. Bruce
-
I see.
I did find a public Panasonic ftp site, ftp://ftp.panasonic.com/pub/Panasonic/call_center/firmware/
Nothing of use there for me.
The reset i did was V/- & i on the remote.
It brings up a self test screen and after power cycling initiates a factory reset.
I didn't have to input any numbers other than resetting the pin to 0000.
I tried your way of holding Vol + & - but all its does is keep scrolling.
Will have a look through the service data for the factory reset, the i found out was on a forum somewhere. Can't find it now!
Managed to upload the service data from here yesterday, i didn't quite get how the upload works out so its outside the Panasonic folder.
Cheers
-
panasonic chassis LH64
-
Thanks Jordan, I had uploaded the service data for the TX-26/32 LXD70 the other day.
Well hopefully good news, I've managed to find the firmware update which covers a number of chassis.
Version EU_HD_UK_LGSAM-v5640.SEC seems to be the cure, have to see how it works out.
I had a feeling by what it was doing it was related to the backlight tube(s)
Found it on avforums.com, a thread talking actually about this issue with the uneven mercury distribution in the tube over time making it hard to start.
I had almost given up looking, then found it :yahoo:
Will upload to the files section, I'm sure I'm not alone. Its still a great TV for my use. I use it mainly with a Humax 1100 Freesat box with HDMI.
Cheers for your help, it did motivate to keep looking :)