Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: samisat on April 25, 2016,10:25:56
-
Hi all,This tv will turn on showing smart tv logo and then goes off again turn on ,showing logo and off.I checked power supply output and all are OK,I will appreciate any help.
Thanks sami
-
-Check CP8145 (82mF/450V) in PSU
-Upgrade firmware
-
Thanks for reply mate ,how can I upgrade firmware?
Thanks :93:
-
http://www.samsung.com/ie/support/skp/faq/1057760
-
https://forum.samygo.tv/viewtopic.php?t=7478
http://www.badcaps.net/forum/showthread.php?t=35143
bootloop samsung d serie google
regards thoma!
-
Hi Sam,
Disconnect the Main from the PSU. If the backlights come on and stay on, the main board is kaput. Bruce
-
Hi. Main board faulty, you cannot upgrade the firmware as the set will not stay on long enough. New board required and they are not cheap. Regards Geoff