Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: EVILMRB on May 05, 2016,07:19:11

Title: BUSH 40/233FDVD
Post by: EVILMRB on May 05, 2016,07:19:11

Hi this Tv is just stuck in standby,but sometimes when you keep pressing the the on button it will come on and stay on.
I have seen this board before in a couple of other sets ie Technika and UMC Just want to know if this could be a firmware fault and if so if anyone as or can get me one please as I can not find one for this model.

Title: Re: BUSH 40/233FDVD
Post by: jordan on May 05, 2016,13:17:19

MB model TP.MSD 309.BP 710

Title: Re: BUSH 40/233FDVD
Post by: EVILMRB on May 05, 2016,17:38:01

Thanks Jordan,will let you know the outcome.

Title: Re: BUSH 40/233FDVD
Post by: EVILMRB on May 05, 2016,18:37:49

Hi put this on to a formatted usb stick but the tv wont recognise it, do you no why this may be.

Title: Re: BUSH 40/233FDVD
Post by: fix2003 on May 06, 2016,02:53:44

looks like a bin file for the 25q32 chip

you will need to remove the chip and reprogram with the .bin file

Title: Re: BUSH 40/233FDVD
Post by: Turnip on May 06, 2016,09:12:35

Hi Folks,

Have a couple UMC using T.MSD309. B66B - A Bush 22 and a Blaupunkt 24. Tried reading Eeprom from both but with no luck at all, Mine too use W25Q32BV.

Thought the problem might be that cap placed so you can't get a standard clip on, so trimmed the clip a bit but still no read.

Puzzled as have not had the problem with other SSB - Reading and even writing successfully in most cases as hate removing the chip if it isn't necessary - Chris.

Title: Re: BUSH 40/233FDVD
Post by: EVILMRB on May 06, 2016,09:45:56

This is a weird one put the USB into the TV and it comes on every time take the USB dongle out and it doesn't turn on.
How the hell is this happening.

Title: Re: BUSH 40/233FDVD
Post by: alex_20 on June 12, 2016,15:45:35

Very, very thanks Jordan!!!  :08: My BLAUPUNKT 40/234I-GB-5B is working!

Title: Re: BUSH 40/233FDVD
Post by: jordan on June 13, 2016,01:07:08

 :brinda: