Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: bonesy on August 04, 2016,07:42:01

Title: toshiba 19dv555db no freeview available
Post by: bonesy on August 04, 2016,07:42:01

Hi Guy's,I've got the above TV,which has lost free-view altogether.If try to select DTV with r/c using ATV/DTV button,you get a message stating free-view system error.If you try to select DTV in input section,you can highlight it,but set returns to previous input.I've looked in service mode,but no settings for freeview or factory reset.I think may be duff software,but if you go to the Toshiba site,sets not listed.Has any one had this fault?
Many thanks John

Title: Re: toshiba 19dv555db no freeview available
Post by: jordan on August 04, 2016,10:12:42

Replace eprom IC-2409 (24C64WP) on DVB-T module where CAM slot is present

Title: Re: toshiba 19dv555db no freeview available
Post by: bonesy on August 05, 2016,04:39:43

Hi Jordan,thanks for your reply,can you tell me,can you fit a blank or does it need to be pre-programmed?My guess is pre programmed.

Title: Re: toshiba 19dv555db no freeview available
Post by: sinclairtv on August 05, 2016,08:11:16

Toshiba sets had a problem with no freeview where you called Tosh service  0333 222 7111 and they would post you flashcard and adaptor as long as you posted it back

Title: Re: toshiba 19dv555db no freeview available
Post by: jordan on August 05, 2016,09:42:50

Probably with blak

Title: Re: toshiba 19dv555db no freeview available
Post by: bonesy on August 05, 2016,10:18:00

Thanks Jordan.