Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: Herbert-Georg on December 08, 2016,05:57:20
-
Please, does anybody knows the value of the resistors R91 and R 92 which are used to create the 12V / 5 Amp. :sign0085:
Best regards
Herbert-Georg
-
try this
may help
-
Yes, the circuit diagram is shown, but there is no page with the values of the two resistors R91 qnd R92. I can't read the value on the resistors itself, because they overheated and one is broken.
Best regards
Herbert-Georg
-
Just checked a board -
Both marked 101 and measure dead on 50 Ohms - Guess that SMD cap in series (C19) must be well cremated - Chris.
Forgot to mention they're connected in parallel (if no schematic)
-
http://www.tv.quuq.org/forum/index.php?topic=9602.msg29592#msg29592
-
Thank you very much for your assistance. I'll try to get those resistors and I hope to succeed with your help.
Best reagards Herbert-Georg