Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: Turnip on March 05, 2017,07:22:49
-
Hi folks,
Got one in, couple years old maybe, where sound and backlight are fine but just a low glow from the screen which might indicate the T/con supply fuse has popped, but T/con appears incorporated at the bottom of the screen.
Wonder if anyone has sorted the problem ? Gather screen failures on this vintage are common.
Thanks for your thoughts - Chris.
-
Hi Chris,
T-Con not incorporated on the main board, as some are wont to do these days? If there are two flexies going into the panel, you could try disconnecting
one at a time to see it you get half a screen. Did this to diagnose a faulty LG last week - one flexi off got me half a picture, reconnected it and took the
other one off, no picture whatsoever in either half. Bon chance. - Bruce
-
Hi Bruce, thanks,
This is a sort'a single most everything board set with external 19v 6.2a P/S. Noticed a single flat flexie heading for the screen at the bottom.
Nearest manual I could find was KDL-42W654 which has few pictures and no schematics or part numbers, but it's good on error flash codes.
My set doesn't flash so guess it doesn't realise the problem exists - Maybe no feedback from the screen drive ? - Chris.
Customer later realised he had a 5 year guarantee - Nice one.