Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: stephenjames on October 26, 2017,06:17:22

Title: Seiki SE40FY01UK eeprom dump/.bin file.Board TP.sis231.P83.Screen T395HJ-PE1-DY1
Post by: stephenjames on October 26, 2017,06:17:22

Another corrupted eeprom! Does anybody have the file for this set.

Title: Re: Seiki SE40FY01UK eeprom dump/.bin file.Board TP.sis231.P83.Screen T395HJ-PE1-DY1
Post by: Turnip on October 26, 2017,11:57:43

Hi Steve,

Not a nice set, met a few, mostly now recycled hoping something better.

Had the 'stuck in s/by' issue so got the programmed Eeprom. Then found I had the 'backlight cycling' issue when it fired up.

Folks who supplied the Eeprom suggested 'Don't bother replace if you have a backlight cycling issue' as the M/Proc is duff.

Not yet a winner - Anyway, copied the new Eeprom, also the one for the 40 inch version, but that didn't work either. Attach your screen version - Best of luck - Chris.

Title: Re: Seiki SE40FY01UK eeprom dump/.bin file.Board TP.sis231.P83.Screen T395HJ-PE1-DY1
Post by: t1412 on November 01, 2017,07:41:42

hi chris could you send me picture of the board i might have one if it's right cheers

shaun

Title: Re: Seiki SE40FY01UK eeprom dump/.bin file.Board TP.sis231.P83.Screen T395HJ-PE1-DY1
Post by: Turnip on November 01, 2017,13:24:22

Hi Shaun,

I didn't bother take a picture. Panel is 'Everything on one board UMC' The worst I've yet met.

Noticed that Ebay can supply everything that doesn't go wrong, but no-one cares to talk about the main board apart from folks who suggest a new Eeprom can cure it - Maybe, if you're real lucky. I wasn't - Chris.