Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: Billynffc on May 14, 2020,14:56:01

Title: Polaroid p50fn0117k
Post by: Billynffc on May 14, 2020,14:56:01

Hi my tv recently went off, on startup the Polaroid logo flashes on screen for a split second then goes off again I’m getting sound I can see the picture with a torch replaced the power board no change any ideas?

Title: Re: Polaroid p50fn0117k
Post by: fix2003 on May 15, 2020,02:32:58

if no back light it will be the inverter board or 1 off the back lights has failed. not seen this model so that's about all the info I can offer

Title: Re: Polaroid p50fn0117k
Post by: Billynffc on May 15, 2020,17:32:23

Thanks for your help is the t con board nothing to do with either of that?

Title: Re: Polaroid p50fn0117k
Post by: fix2003 on May 16, 2020,02:53:31

the fact you see the picture with a torch, means main board and tcon and screen must be working the psu is to a degree but check the power to the inverter board to show psu ok .that just leaves inverter circuit and backlights

Title: Re: Polaroid p50fn0117k
Post by: Billynffc on May 16, 2020,03:38:44

I’ll check it out thanks for your help

Title: Re: Polaroid p50fn0117k
Post by: t1412 on May 19, 2020,00:49:42

i've just fixed 2 of these tvs, if you get a brief flash on screen when you switch it on, then it'll be the backlight, i got caught out, forgot to do a torch test, thought it was backight fault, turned out to be a mainboard fault, cheers

shaun