Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: kosi636 on December 29, 2020,03:15:54

Title: Telefunken tv repair
Post by: kosi636 on December 29, 2020,03:15:54

Hi,
I have a problem with my Telefunken television.
If I connect to power turning on and only changing colors.
Tv modell: Telefunken d48f282n4cw
Source of the problem probably the current fluctuation.
Can you help me how can I resolve this problem?

I have bought a main board and it does same thing.
Is it firmware related?

Thank you

Title: Re: Telefunken tv repair
Post by: jordan on December 29, 2020,10:38:24

Stuck in Burn-in mode (display turns red, green, blue, black and white).
Clean LVDS cable at T-CON board side.

Title: Re: Telefunken tv repair
Post by: kosi636 on January 03, 2021,04:56:48

I've cleaned all cable with pure aclohol, I've tried with refirmware but didn't help

Title: Re: Telefunken tv repair
Post by: astracat on January 04, 2021,09:03:35

hi
going to need more info before help ie model number ,serial number, is it led/tubes/plasma ?
try menu 4725 to enter service mode if it comes up look in there to do a factory reset
then set up as out of box new
regards
astracat