Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: amennone on February 22, 2021,16:39:40
-
Power: LGP43DJ-17F1
Fault: No power on the secondary.
I have checked diodes and transistors and they are ok. Resistors are o.k.
Replaced IC101 = SSC3S927, IC601 = SSC2016, still no secondary side voltage
I need the schematic and some repair tips.
Thanks and good job .
-
hiya
is in standby or is it just dead,check ic 101 voltages think pin 1 is the start up pin if so needs aprox 9v on it to start its output usually high value resisters feed it which can go high ,best to check all pin voltages and let us what they are then might be able to help better
regards
astracat
-
IC 101 = SSC3S927
Pin 4 1v2 unstable
Pin 18 254 v
Pin 2 V 16v (INPUT)
Pin 12 8v (Output)
ZD 103 = 0v
ZD 102 = - 3v8
D 101 = anode 10v
D101 = Katode 8v
D107 = 16v
C 611 = 321v