Mulja tv repair portal

Service manuals & datasheets => CRT TV forum => Topic started by: mavmcr on September 06, 2008,08:07:13

Title: Sharp Service Mode Help
Post by: mavmcr on September 06, 2008,08:07:13

I have a 76fw-53h tv that I can get into service mode, adjust the settings but then there is nothing I can see to save it.

Anyone know how you save your adjusted settings?

Title: Re: Sharp Service Mode Help
Post by: michael first on September 08, 2008,04:35:27

Hi,could you tell what kind of chassis is mounted? Is it an old model?

Title: Re: Sharp Service Mode Help
Post by: lubos55 on September 08, 2008,13:05:24

Hi,I have only eeprom dumps for your TV.If you need this,I will send it.

Title: Re: Sharp Service Mode Help
Post by: brainstorm on September 17, 2008,08:12:30

Hi,
1, switch off set with mains switch.
2,Press volume down and channel up buttons on the front of the reciever at the same time.
3,Keeping these buttons pressed in -switch on with the mains switch
4,When the set starts up it will be in service mode.
5,Release the two buttons.
Use the channel up and down buttons to move between options
Use the volume control buttons to change the data
To store the data use the standby button
To exit the service mode turn off the reciever with the mains switch
Hope this helps