Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: bob-meade on November 27, 2008,14:11:11

Title: Technosonic LCD2603
Post by: bob-meade on November 27, 2008,14:11:11

Hi Folks
I purchased one of these from Big-pockets, & whilst it works, there seems a lot of overscan....IE the edge of the picture is missing. Has anyone else had this problem?
Would it be eeprom Tony?
Cheers if you can assist.
Bob

Title: Re: Technosonic LCD2603
Post by: tv tony on November 30, 2008,02:53:19

NOTHING SILLY IS IT, WRONG ASPECT RATIO SETTING, ITS CAUGHT OUR SALES GUYS OUT

Title: Re: Technosonic LCD2603
Post by: bob-meade on November 30, 2008,04:41:55

Thanks for your reply Tony, trouble is whilst you can change the size & shape using the remote, with true 16/9 transmissions, there is lots of missing information on both sides.....plug into the scart a freeview or Skybox set to 16/9, no problems......I guess the problem lies within the built in DTR tuner.
Bob

Title: Re: Technosonic LCD2603
Post by: rebel-mc on November 30, 2008,13:05:16

Hi, This is a known fault.  The same fault occurs on the Tevion 26" tv's as well.

Title: Re: Technosonic LCD2603
Post by: bob-meade on November 30, 2008,16:53:08

Hi Rebel
Thanks for that bit of info, has anyone found a cure - apart from plugging in an external box that is?!
Cheers
Bob

Title: Re: Technosonic LCD2603
Post by: rebel-mc on November 30, 2008,17:14:14

I don't think there is a cure for it.  The tevion (aldi) tv's were replaced with a slightly diffent model that didn't have this problem.