Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: richie on January 02, 2009,18:03:46

Title: sharp aquos lc-32gd8e, red tinge
Post by: richie on January 02, 2009,18:03:46

hi, got the following prob with my out of warranty sharp lcd.
Any white is shown with a pink/red tinge. i have gone into the service mode and done a factory reset but the fault is still there. hope the photo link works, the faulty set is the bottom one

Title: Re: sharp aquos lc-32gd8e, red tinge
Post by: tv tony on January 03, 2009,08:49:53

its on the cable that connects the screen to the signal pcb, shake to verify, not guaranteed but likely
tv tony

Title: Re: sharp aquos lc-32gd8e, red tinge
Post by: Studi on January 03, 2009,14:34:19

More likely the Screen Driver has failed. It's the small board, top centre of the screen. You will need the part number off it to replace.

http://www.sjstv.co.uk/lcd-driver-pcb.html

Title: Re: sharp aquos lc-32gd8e, red tinge
Post by: tv john on January 13, 2009,00:09:42

Hi,I had a Sharp 32inch lcd with a similar fault months ago. This one had a green tinge to the whites,which got better on lowering contrast levels like a washed out crt.It turned out to be the digital pcb under another panel(don't have my faults book to hand to confirm).This pcb is available from Chas.Hyde & Son ,but at a price.

tv john

Title: Re: sharp aquos lc-32gd8e, red tinge
Post by: phillotus on January 27, 2009,15:13:18

had this fault several times go into service mode then scroll down the pages to eeb settings then clear both then re-tune :clap: