Mulja tv repair portal
Equipment Repairs => CRT TV forum => Topic started by: thesarus on January 23, 2009,16:54:29
-
hi tv dead fuse blown in plug
help please
-
Hi if the fuse is blown in the plug.
You will have to check if the Line output transistor is OK. If Ok then th fault is in the power supply.
-
Hi, I am sure on this model the on/off switch breaks down internally blowing the fuse. Norman
-
Norman the switch is working ok. Replaced 20Ou 385v no more blown fuse.
No picture no sound. Sydney will check lopt.
thanks
-
hi tv dead fuse blown in plug
help please
Hi,check degausing circuit.