Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: BestGear on February 16, 2009,08:41:46
-
Guys
Its my first post here - so Hi!
I am trying to repair our Technika TV... ok - its a cheap telly, but it did ok!
Fault - white screen at startup - and green LED, no sound, picture or OSG.
The 5 and 12v rails are fine.
Doing some digging, the set appears to be made by Konka and its a KLC-2018.
Any help - even generic help as to what a white screen is caused by would be most appreciated.
Thanks in advance
David
-
Check 5v or 3.3v on LVDS cable from main board to screen
:brinda:
-
Thanks for the tip - will check it out when I get a couple of mins.
Much appreciated.
David