Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: phusky on February 14, 2007,07:03:54

Title: led standby light flashes tv not firing up
Post by: phusky on February 14, 2007,07:03:54

bush lcd27tv600hd
switch power on..........stanby led light on
use remote or press led switch..........led light just pulses on and off continuesly
tv does not power up.
      any suggestions.

Title:
Post by: mulja on February 15, 2007,04:08:46

Check 5v and 3.3v regulators.

Title:
Post by: phusky on February 15, 2007,10:45:02

thnx mulja, did check outputs...seemed ok but will recheck.
                         phusky

Title:
Post by: adm2007 on August 22, 2007,10:11:20

normaly 1000fd capie bulged in power supply

Title: Re: led standby light flashes tv not firing up
Post by: dskservices on July 03, 2008,06:48:38

capacitors in power supply are a common problem on these.