Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: sparky on May 08, 2009,07:49:33

Title: digifusion d26wlz53hid
Post by: sparky on May 08, 2009,07:49:33

Hi,
Help needed fault white screen no osd, remote works.also sound present,
check voltage seems ok,
have checked fuse on small panel connected to screen ok, nothing over heating or
burnt out
thanks sparky

Title: Re: digifusion d26wlz53hid
Post by: sparky on May 09, 2009,05:16:02

hi
have connected thro scart to another tv good picture must be screen faulty
sparky

Title: Re: digifusion d26wlz53hid
Post by: tv john on May 12, 2009,15:11:36

Hi sparkie,
               With most picture faults I allways clean and apply a drop of the old WD40 to both ends the
LVDS plugs and sockets first. The percentage of success is quite good.

      tv john.

Title: Re: digifusion d26wlz53hid
Post by: mulja on May 13, 2009,05:11:29

Check 3.3v and 5v on LVDS cable

Title: Re: digifusion d26wlz53hid
Post by: sparky on May 13, 2009,13:33:25

Thanks for replying have cleaned both ends no go, checked the supply going in got
the 5v's but going across the connections with fluke meter not sign of other voltage.?
I don't have circuit diagram
Sparky
Also just aquired taylor 127a mk 111 multimeter no batts inside do any one now were to get hold of some
thanks again