Mulja tv repair portal
Equipment Repairs => CRT TV forum => Topic started by: daz on May 22, 2009,12:37:06
-
fault is a burst of eht then the set shuts down - 2 flashes
i have tried the lopt and the main smoothing block which i have had cause the fault before,
r618 is also suposed to cause this fault but i cant find it anywhere on the pcb and the components
in the ocp circuit check out ok
any help would stop me takeing an axe to the set
many thanks
-
This is an AE6D chassis, with the AE6B chassis this can be caused by one of the RGB chips.
I don't know how similar these chassis are! Hope this helps.
Keith