Mulja tv repair portal
Equipment Repairs => LCD TV forum => Topic started by: catnamedog on June 10, 2009,12:27:38
-
Hi!
I bought a 40" Technika LCD-TV from Tesco over a year ago. Its great, except its started to develop a strange problem, which seems to be getting worse.
Its connected via the HDMI lead to a Virgin+ box. I used the 4-digit code supplied by Virgin to program the V+ remote so that it could control the TV volume - (Note: it doesn't control any other TV feature).
Now, whenever we use the V+ remote to say, change V+ channels the TV switches from the HDMI input to the standard analogue input, always on channel 77. I then have to either go into the TV setup menu and manually select the HDMI input, or switch the TV off and back on again and let the TV auto-detect the HDMI signal>
Alarmingly, when I phoned the Tesco helpline, I was told that they don't repair this TV at all! When I asked for a recommended repairer, the Tesco guy said that they don't keep a record of them, and that my choice was to either scrap the TV, or see if I could find anyone to help me.
I've tried all the standard "reset" things, including removing batteries, leaving the TV off overnight, and so on.
Can anyone help me please?
-
hi sounds like youve used wrong code number had similar with sky box, only other option is to disable remote options in hdmi setup
-
Hi, and thanks for your reply.
I've been using the same code since we bought the TV, but its only recently been showing this problem. I suspect that the problem lies in a faulty IR detector, because the TV shows the same fault sometimes when using the TV remote.
-
Hi
try taking hdmi lead out of v and virgin box, and just view the freeview channel built in tv .
The v+box aren't 100%.perfect.
sparky