Mulja tv repair portal

Equipment Repairs => LCD TV forum => Topic started by: Homework on June 22, 2009,02:52:16

Title: Bush LCD19W008HD Service Mode or change to PAL B/G
Post by: Homework on June 22, 2009,02:52:16

Hi there,
Does anyone know how to access the sevice mode of Bush LCD19W008HD?

I am desparate to change the TV tuner standard to PAL B/G from PAL I. Its is factory set to PAL I and the normal menu does not let me change it.

Any help on this is greatly appreciated.

Title: Re: Bush LCD19W008HD Service Mode or change to PAL B/G
Post by: tv tony on June 22, 2009,04:31:11

sorry for late reply, menu is accessed by pressing menu 4725, then on you can select desired options. good luck
tony

Title: Re: Bush LCD19W008HD Service Mode or change to PAL B/G
Post by: Homework on June 22, 2009,07:43:51

Hi Tony,
Thanks for the reply. While the TV was on, I pressed Menu, 4, 7, 2, 5 as you stated. The service menu does not get activated through this sequence.

Title: Re: Bush LCD19W008HD Service Mode or change to PAL B/G
Post by: tv tony on June 22, 2009,08:47:28

i will swot up on it
tony

Title: Re: Bush LCD19W008HD Service Mode or change to PAL B/G
Post by: Homework on June 22, 2009,10:37:57

Thanks ........

Title: Re: Bush LCD19W008HD Service Mode or change to PAL B/G
Post by: Homework on July 23, 2009,12:57:03

Found the factory menu;

On remote press - Disp, Red, Green, Yellow, Disp

However, this does not let you change PAL I to PAL B/G.